Preparation before bearing installation
1. The installation should be carried out in a dry and dust-free room as far as possible, and away from metal processing or other equipment that will produce metal debris and dust. When everything is ready to open the bearing rust packaging.
2. The anti-rust oil on the bearing has lubricating properties, and can be used directly without cleaning the bearings for general purposes. For instrument bearings or high-speed bearings, the anti-rust oil of the bearing should be cleaned and then applied with a suitable lubricant for use, and the bearings filled with grease with a seal or dust cover can be used directly.
3. the tools used for installation should be mainly wooden or light metal products, and keep clean.Inspection of shaft and housing
1. Clean the shaft and shell, and make sure that there are no scars or burrs left by machining.
2. Check whether the size, shape and processing quality of the shaft and the shell are consistent with the drawings. Measure axle diameter and housing bore in several places.
